Where The World Can Find Motorized Traffic Spikes For Less !!!

Two Models To Choose From  both Above Ground and Flush In Ground Models Available

 System has  one Tunnel Section   measuring 3 feet  (3’-0”) Tunnel Section 1/4" steel next to Motor Box  with no traffic spikes

and 2 (3’-foot ” sections with Control spike in Modules  

 You Can add additional 36” control modules with teeth which are available for longer drive ways up  to  30 feet

Height: Ramp 3” above grade finish 

Finish: Safety Red Or Safety Yellow (please specify) 

Features: Cycle times of 1 second (red/green light cycles), custom programmable logic 

Time-proven hydraulic power units, and hydraulic actuators.

SURFACE  & SUB SURFACE MODELS

The  automated/motorized hydraulic, surface-mounted traffic controller is designed to regulate the flow of traffic through a secured control point, while providing a visual and physical barrier to approaching vehicles and preventing against unauthorized vehicles entering and/or exiting a secured area. The unit is surface-mounted to assist in the elimination of excavation and drainage problems

Optional– For Wet Weather Environments Get  POWDER COATING  each 3 foot  section  add   $150.oo per panel

Helps prevent water damage due to rust

 Includes  1 three foot   1/4" steel tunnel with no teeth in the section next to motor box

includes   2 qty  -  3' foot spike panel  1/4"   Steel sections  for  $9,750.00 Plus Freight

Additional 3 Foot Sections are  available up to  15 feet of teeth sections  $ 1175.00 each plus freight

Longer lengths require different gearing and more powerful motors

the longer the teeth sections the more lag  or play there will  be  at the end furthers from the motor box

this can result in the end teeth section not coming up all the way

  Works with or without Gate Arm

6 feet of Motorized Directional Traffic Spikes  AND 1 2 FOOT TUNNEL NEXT TO MOTOR BOX

With  1/4 “ Ramp  WORKS  FOR   Semi Trucks and large Heavy  Axel Loads-  ocossionally  

 includes one motor box assembly

  Motorized Surface Mount Traffic Spike System - 1/2 HP 115 VAC -

  Motorized Surface Mount Traffic Spike Extension - PANELS AVAILABLE FOR  UP TO   18 FEET OF  Spike Section

MOTORIZED TRAFFIC SPIKES

MODEL   SPEMB     WITH 1/4 " TOP PLATE   $ 9400.00pLUS FREIGHT

  Additional 3 foot extension panel WITH TEETH ARE  available   $ 1440.00 EACH PLUS FREIGHT

 Optional : not include   accepts lift arm gate from  12-14' Arm 

Click here for Gate options

  Control the Flow of Traffic Entering and Exiting

 This Model SPDK16 must be used with a lift arm gate-

 Automated Spike Systems are designed as a modular system allowing for easy flexibility in different applications and easy installation.

The   operator is designed with many advanced features and mechanically links the spikes to the barrier arm.

The surface mount spikes are easy to install and do not require any trenching or excavating.

The   auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.

A complete  auto-spike system consist of several different components.

A typical system will require an  operator, transfer box which is factory installed

as well as a tunnel section and spike sections as needed,

Call for Pricing 915=240-4747

  TOKEN CONTROLLER

See other options

Unattended TOKEN CONTROLLER for allowing access or exit at controlled check points

click here

Call 915-240-4747

 Where Peace of Mind Begins

Security Product's Unlimited

Saves You Money

Two Models To Choose From  both Above Ground and Flush In Ground Models Available

 System has  one Tunnel Section   measuring 3 feet  (3’-0”) Tunnel Section 1/4" steel next to Motor Box  with no traffic spikes

and 2 (3’-foot ” sections with Control spike in Modules  

 You Can add additional 36” control modules with teeth which are available for longer drive ways up  to  30 feet

Height: Ramp 3” above grade finish 

Finish: Safety Red Or Safety Yellow (please specify) 

Features: Cycle times of 1 second (red/green light cycles), custom programmable logic 

Time-proven hydraulic power units, and hydraulic actuators.

SURFACE  & SUB SURFACE MODELS

The  automated/motorized hydraulic, surface-mounted traffic controller is designed to regulate the flow of traffic through a secured control point, while providing a visual and physical barrier to approaching vehicles and preventing against unauthorized vehicles entering and/or exiting a secured area. The unit is surface-mounted to assist in the elimination of excavation and drainage problems

Optional– For Wet Weather Environments Get  ZINC COATING  each 3 foot  section  add   $150.oo per panel

Helps prevent water damage due to rust

Accessories available:

Alarms, battery back-up, Red/ Yellow traffic lights. 

Basic System Cost

 Includes  1 three foot tunnel section 1/4" steel tunnel has  no teeth in section next to motor box

includes   2 qty  -  3' foot spike panel  1/4" Thick Steel sections

 Control the Flow of Traffic Entering and Exiting

Traffic tire spike systems are available in either above-ground or in-ground versions. 

Our tire spikes systems utilize a propriety spring-loaded and counter balanced system to prevent tire damage to out-bound vehicles. 

The teeth of our tire spikes are made of hardened steel for years of dependable service.

 This Model must be used with a lift arm gate-some options

Automated Spike Systems are designed as a modular system allowing for easy flexibility in different applications and easy installation.

The   operator is designed with many advanced features and mechanically links the spikes to the barrier arm.

The surface mount spikes are easy to install and do not require any trenching or excavating.

The   auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.

A complete  auto-spike system consist of several different components.

A typical system will require an  operator, transfer box which is factory installed

as well as a tunnel section and spike sections as needed, with an end cap.

We have various gates options available

 Model 9410-010 -  Plug-in single channel detector. 

 Model 1601-260 - Foam padding kit for aluminum or wood arm-

 Model 1601-092 - Heater Kit 

  Model 1601-093 - Fan Kit 

 9409-010 -   2-channel detector. Use with Gate  operators only 

 Select the length of the arm you need

Tunnel Sections Required for this Motorized Spike Operator

  Works with or without Gate Arm

6 feet of Motorized Directional Traffic Spikes  AND 1 2 FOOT TUNNEL NEXT TO MOTOR BOX

With  1/4 “ Ramp  WORKS  FOR r Semi Trucks and large Heavy  Axel Loads-   

 includes one motor box assembly

  Motorized Surface Mount Traffic Spike System - 1/2 HP 115 VAC -

  Motorized Surface Mount Traffic Spike Extension - PANELS AVAILABLE FOR  UP TO   30 FEET OF  Spike Section

MOTORIZED TRAFFIC SPIKES

SPEMB  MODEL  WITH 1/4 " TOP PLATE   $ 9357.00pLUS FREIGHT

  Additional 3 foot extension panel WITH TEETH ARE  available   $ 1440.00 EACH PLUS FREIGHT

 Optional : not include   accepts lift arm gate from  12-14' Arm 

Click here for Gate options

Call 915-240-4747

  TOKEN CONTROLLER

See other options

Unattended TOKEN CONTROLLER for allowing access or exit at controlled check points

click here

Call 915-240-4747

 Where Peace of Mind Begins

Security Product's Unlimited

Saves You Money