FeelSafer.com  

Window Speak thru Grills

Where Peace of Mind Begins

915-240-4747

Speak thru Grills  Non amplified two Plates one center screw

 

Aluminum  window Grill Plates
 

Ticket window Speak thru Grills

 Aluminum  Speak-Thru Grill

Consists of two plates 2 cork and one center screw, the screw length can vary for different thickness of glass

 

 Can Be Used With Glass up to 1/4" (6 mm) Thick  or thicker with a longer screw

 used at ticket booths for easier voice transmission

Designed  to prevent tampering from the outside, and stop drafts to the interior. 

 Each unit is individually boxed with cork gaskets and mounting screw  for installation on glass up to 1/4 inch (6 millimeter) thick.

For thicker glass up to 3-3/4 inch a cut down screw of  four inches will be required

This Model Requires  a minimum hole diameter of 2-1/4 inch   and will cover holes up to 4-1/4 inch  as the unit is 5 1/8" in diameter

 Recommended hole diameter is three to four inches for best sound transmission

This Grill does not amplify the voice

Note this  is a Grill   that is  Not a  Amplified  intercom as pictured below

$ 77.00 each  plus  shipping

 

 

Model  Polished aluminum


  
Polished Aluminum Finish

 

Can Be Used With Glass up to 1/4" (6 mm) Thick 

 Speak-Thru  grills  are designed to allow voice transmission of voice requests at ticket windows, box offices and more. T

hey prevent tampering from the outside, and stop drafts to the interior. The Grill plates are made of aluminum.

Each unit is individually boxed with gaskets and mounting screws for installation on glass up to 1/4 inch (6 millimeter) thick.

For thicker glass up to 3-3/4 inch (95 millimeters), you must use the optional four inch cut down screw

The Grill   require a minimum hole diameter of 2-1/4 inch (57 millimeter), and will cover holes up to 4-1/2inch (108 millimeter).

Recommended hole diameter is three  to four inch (76 millimeter).

 

  $87.00 each plus shipping

 

Model  Black Finish
  

  Bronze black  Finish

 

Can Be Used with Glass up to 1/4" (6 mm) Thick

Can Be Used With Glass up to 1/4" (6 mm) Thick 

 Speak-Thru  grills  are designed to allow voice transmission of voice requests at ticket windows, box offices and more. T

hey prevent tampering from the outside, and stop drafts to the interior. The Grill plates are made of aluminum.

Each unit is individually boxed with gaskets and mounting screws for installation on glass up to 1/4 inch (6 millimeter) thick.

For thicker glass up to 3-3/4 inch (95 millimeters), you must use the optional four inch cut down screw

The Grill   require a minimum hole diameter of 2-1/4 inch (57 millimeter), and will cover holes up to 4-1/2inch (108 millimeter).

Recommended hole diameter is three  to four inch (76 millimeter).

 

$ 97.00 Each  plus shipping

 

 

 

   

Bright Gold   Polished Finish Speak-Thru

 

  Fits Glass up to 1/4" (6 mm) Thick

Can Be Used With Glass up to 1/4" (6 mm) Thick 

 Speak-Thru  grills  are designed to allow voice transmission of voice requests at ticket windows, box offices and more. T

hey prevent tampering from the outside, and stop drafts to the interior. The Grill plates are made of aluminum.

Each unit is individually boxed with gaskets and mounting screws for installation on glass up to 1/4 inch (6 millimeter) thick.

For thicker glass up to 3-3/4 inch (95 millimeters), you must use the optional four inch cut down screw

The Grill   require a minimum hole diameter of 2-1/4 inch (57 millimeter), and will cover holes up to 4-1/2inch (108 millimeter).

Recommended hole diameter is three  to four inch (76 millimeter).

 

$ 107.00 each plus  $shipping

Sales tax may apply in some states including Texas unless tax exempt

the cost to ship these units ranges between $ 10 and $15 dollars depending on the location

 

Stainless Steel for higher security

 

 Non bullet resistant Model  Grills  in 5 inch and 7 inch Diameters

NON BULLET RESISTANT RATED Higher Security Grills

Steel Speak-Thru available in 5 " and 7" provides natural voice transmission.

Offset slots in front and rear prevent tampering from the outside, and stops drafts to the interior.

Speak-Thru has a brushed stainless finish, and comes in two sizes.

Screws are included that will this item to accommodate glazing thicknesses of up to 1-1/4 inches (32 millimeters) thick

 

Provides Natural Voice Transmission

   7 inch speak thru 7" diameter Price 1 unit  $ 250.00  plus shipping 

   5" speak thru diameter Price 1 unit  $ 240.00  plus shipping 

 

 

 

    

 

Screened Opening for Insect Free Environment

4" and 6" inch Models Available  in Two Finishes

Choice of Metal or Lucite Cover

Covered Speak-Thru grills  are available with two styles of covers: all metal, or metal outer ring with Lucite vision port.

Both styles are screened to provide an insect free environment.

These heavy duty units are available in satin anodized or dark bronze finishes.

Both 4 and 6 inch  sizes are made to be glazed in 1/4 inch (6 millimeter) glass.

 

The four inch (102 millimeter) model requires a 3-1/2 inch (89 millimeter) diameter hole.

  $227.00 each   Metal cover

 

 

The six inch  model requires a 5-1/2 inch (140 millimeter) diameter hole.

  $257 .00  each Lucite cover

 

We also carry a variety of

Speak Thru Grills

Bullet Resistant Speak Thru Grills

Correctional Speak Thru Intercoms

Intercoms for ticket windows

 

 Product Questions: 915-240-4747

 

Major Credit Cards Accepted

 

 

Hit Counter