Surface and In-Ground
Traffic Road spikes
Available in 3 ' Foot panels with a ramp height of only 3" 1/4" made with
COLD ROLLED STEEL
Model SP DC Model -36" NON latch MODEL
Spike Panels 3 foot sections-
3 foot is a non latch panel for above ground installation
1/4" Ramp and Standard Top Plate - weight 135 lbs. Non Latch $ 595 each panel plus freight
1/4" Ramp and Standard Top Plate - weight 135 lbs Latch Down Teeth $ 795 each panel plus freight
3/8 THICK HEAVY DUTY 3’ foot panel NON LATCH TEETH $ 895.00 plus freight
HEAVY DUTY 3/8" THICK RAMP Ramp PLATE WITH ("latch down") $ 995.00
with Latch down Feature
These CS Panels are available in Yellow Or Red
The units are now Powder coated instead of painted
OPTION # 1
THE SURFACE MOUNTED 3 FOOT SPCS-36-SM-LD 1/4" Surface
Designed for an axel load of up to 22,000 lbs comes with latch down teeth
Special offer Regular Price $ 795 on sale for $ 695.00 each
12 Plus units $675.00 each plus freight
both Models Features Powder coated Panels in either Fire Engine Red or Yellow
OPTION # 2
SPCS-36-SM-LD 3/8" Thick Heavy duty Ramp Surface
UPGRADE TO A 3/8" RAMP WITH LATCH DOWN TEETH AND HEAVIER RAMP PLATE
Upgrade to a 3/8" Ramp with angle iron supports
FOR HEAVIER USAGE BY- SEMI TRUCKS
Save Regular Price $ 895 each on Sale for $ 795.00 each plus freight
Note: zinc coat then Painted
Single top Plate Surface mounted Road spike Panels
Option 3
Heavy duty panel is a single 3/8” thick Single top Plate
Note: These units have two shafts 18” Shafts with 5 teeth per shaft
Each has 6 recessed Bolts that Secure the Single Piece Top Plate to the Frame
There are literally thousands of these units Field TESTED
The Manufacturer of these Products has over 25 years Experience Making These kinds of Products
1/4" model Please note that the List price $875 each plus freight
3/8" model Please note that the List price $1275 each plus freight
End caps are $ 295 Pair Plus freight.
Call about spike panels where the teeth are offset from center on the low end of the panel
these road spikes are designed for low profile cars, sports cars and exotic cars only a few inches off the ground
The approach angle on Traffic spikes is important to consider
example a semi trucks exits a gate crossing the panels . then starts to turn to exit the lot or yard , as the back tires are approaching the spikes the truck begins to turn so the back tires are now at and angle
less that 90 degrees as they cross the panels, this can cause tire damage to most tires, so depending on your situation, this may be a consideration
with these panels the teeth are positioned down from center from the top allowing the angle at which the tires to cross at a greater angle than straight on
Surface mounted low profile panels are approx $ 1550 each depending on quantity
additionally have fewer shafts or bearing blocks
Call for more Information 915-240-4747
In Ground Traffic Panels
In Ground Latch down Model
Traffic Controller
The In -ground SPCS36FM flush-mounted traffic controller WITH A 1/4" TOP PLATE
is designed to regulate the flow of traffic through a secured control point, by providing both a visual and physical barrier.
This unattended, one-way traffic controller will work with any width roadway by installing 36" modules end-to-end.
This is an in ground panel that is mounted to a flat concrete surface
Teeth extent 2 1/4" above grade
weight 125 lbs per panel
Long life steel alloy torsion springs (chrome vanadium),
3/8" laser-cut top plates, zinc-plated teeth,
welded steel frame.
Latch down kit standard on all units.
Available in 36" 3 foot models
Or available in 6 foot long models
or 72" modulesoption #
1SP-CS36FMLD 1/4" 3 FOOT PANEL TOP PLATE-& latch down teeth
Save only $ 695 each with latch down teeth
plus freight
option #2
SP-CS36FM 3 FOOT PANEL- 3/8" heavy duty model 30,000 lbs. Axel Wt.
$ 795.00
each plus freightOption #3
SP-CS36FMLD Z 1/4"
With Standard Top plate- COMPLETELY Zinc Coated for Salty wetlandsTEETH/BEARING BLOCK-FRAME-TOP PLATE ALL GALVANIZED
$ 895.00 each plus freight
Model SPDC-72"NL NON LATCH
1/4" TOP PLATE flush mount in ground spike panel-6 FOOT PANEL Super special Just $ 1150.00 3 plus $1100 each
Model SPDC-72"LD 1/4" LATCH DOWN $ 1250.00
Model SPDC-72"LD 3/8" LATCH DOWN $1550.00 plus freight
Model SPDC-72"LD 1/2" LATCH DOWN $1850.00
In ground 6’ foot below grade directional traffic controller
Model Directional Controller 72" or 6 foot NON-LATCH-Panel Model
This is an in ground flush mounted traffic control device Panel
Special $ 1375.00 each non latch model
Special $ 1675.00 each latch down teeth model
SUPER HEAVY DUTY MODEL 1/2" STEEL Top Plate COLD ROLLED Steel
Model SPDC-72-HD 1/2 NL NON LATCH TEETH" military model
Special $ 1875.00 each
915-240-4747
or email us your request
looks like it will damage but that the deterrent like a dummy camera
SP DC 72 LD LATCH DOWN (NON Penetrating Model ) call for pricing
Call toll free Today
915-240-4747
915-240-4747
For Pricing Call 915-240-4747
or email us your request
Please indicate how many feet required & Model desired Surface or In-ground spike panels